Warning. When checking the oil level, the vehicle must be in a horizontal position.
1. Remove the oil fill plug. Check the oil level, which should be near the lower edge of the threaded hole for the plug (pic. 12.1). If the oil level is low, add the required amount of oil.
Pic. 12.1. Checking the gear oil level in the gearbox
2. If the oil is contaminated or the viscosity is not correct, change it.
3. On the F5MR1 gearbox, tighten the oil fill plug securely by hand.
Recommended tightening torque: 2.3 Nm
4. On the F5M42 gearbox, tighten the oil fill plug to the required torque.
Tightening torque: 32 Nm
5. On the F5MV1 gearbox, tighten the oil fill plug to the required torque.
Tightening torque: 35 Nm