Car manual transmission Mitsubishi Space Star

Manual transmissions — technical data
sealant Spring pin - MITSUBISHI GENUINE PART MD970389 or equivalent. General information The gearbox is housed in an aluminum alloy crankcase and attached to the left...

Checking the transmission oil level
Inspect the gearbox for oil leakage. After removing the filler plug, check the transmission oil level. If the oil is contaminated, change it. Warning. When checking the...

Changing gear oil in the gearbox
Draining the gearbox oil will be faster and more efficient if this operation is carried out after the engine has warmed up to operating temperature and after a test...

Checking the Transmission Oil Temperature Sensor
1. Remove the plug and drain the gear oil from the gearbox. 2. Remove the transmission oil temperature sensor (pic. 12.6). Pic. 12.6. Temperature sensor location 3. Dip...

Check of functioning of the mechanism of blocking of inclusion of a transfer of a backing
1. Perform the following verification operations. The reverse gear lock ring does not pull up. Move the lever in the chosen direction (in reverse gear direction), until...

F5MR1 Gearbox Shift Mechanism
Removing Warning. When removing and installing the shift lever and the shift rod, be careful not to hit the electronic control unit of the additional passive restraint...

Gearshift lever of a car with a gearbox F5WIR1
Removing Remove the center console. Remove the air filter. Turn away a nut and take a bolt of fastening of draft of a gear change from the side of the gear lever. On the...

F5M42 Gearbox Shift Mechanism
Removing Warning. When removing and installing the lever and the shift rod, be careful not to hit. the electronic control unit for the additional passive restraint...

Gearshift lever of a car with gearbox F5M42
Disassembly Remove the shift lever. Turn away a nut and remove an arm of cables of a choice and a gear change (pic. 12.13). Pic. 12.13. Gearshift lever of a car with a...

F5MV1 Gearbox Shift Mechanism
Removing Remove the air filter. Remove the center console. Remove the lower transmission bracket. Pull up to remove the shift lever knob (pic. 12.14). Pic. 12.14. F5MV1...

Gearshift lever of a car with a gearbox F5MV1 and F5M42 from 2000 of release
Disassembly Remove the shift lever. Remove lever (pic. 12.15). Pic. 12.15. Gearshift lever for vehicles with F5MV1 and F5M42 gearboxes from year 2000: 1 - lever; 2 -...

Removing and installing gearbox F5MR1
Warning. To prevent damage to the gearbox mounting mounts, the connections at the points marked «*» in figures 12.16 and 12.18 should be pre-tightened, and the final...

Removing and installing gearbox F5M42
Warning. In order to prevent damage to the box mounting supports, the connections are in the places marked «*» in figures 12.22 and 12.23 should be pre-tightened, and...

Removal and installation of gearboxes F5MV1 and F5M42 from year 2000
Warning. To prevent damage to the gearbox mounts, the connections at the points marked «*» in figures 12.26 and 12.27 should be pre-tightened, and the final tightening...