2. The pressure in the downshift clutch line is adjusted with the adjusting screw shown in Figure 13.31. Turning the adjusting screw to the left increases the pressure.
Pic. 13.31. Location of the pressure adjustment screw in the control system
Note. Pressure adjustment to nominal values is possible when 1st or 2nd gear is engaged.
Rated pressure: 1010-1050 kPa
Change in pressure when turning the screw for 1 turn: 35 kPa
3. Replace the control valve block cover and add transmission fluid to the transmission.
4. Check the pressure in the control system. Readjust system pressure if necessary.