Removing
- Disconnect the wires from the battery terminals.
- Release the spring clips and remove the air filter cover (pic. 4.38).
Pic. 4.38. Air filter: 1 - air filter cover; 2 - air flow meter; 3 - air filter element, 4 - air intake hose; 5 - air filter housing; 6 - air duct; 7 - resonator
- Remove the air filter element.
- Remove the bolts, disconnect the connector, loosen the clamp and remove the air flow meter.
- Disconnect the hoses and remove the air intake hose.
- Remove the battery from the vehicle.
- Turn out bolts and remove the case of the air filter.
- Remove the air duct.
- Remove the lower engine mudguard.
- Turn out a bolt and a nut and remove the resonator.
Installation
- Installation is carried out in the reverse order of removal, taking into account the following.
- Thoroughly clean the inside of the air filter cover and housing before installation.
- Before installing the air flow meter, make sure that the hole in the meter is clean.
Warning. If the air mass meter opening is dirty, the air mass meter will not be able to correctly determine the amount of air flow into the engine.