The inside of the mirror gives the same image that you can see in a normal mirror. The outer part of the mirror provides a whiter wide viewing angle.
External rear-view mirrors with manual control
Adjust the position of the mirror by operating the lever in the directions indicated by the arrows in the figure.
1. In the horizontal plane; 2. In the vertical plane
Electrically operated exterior mirrors
The outside rearview mirrors can be operated when the key in the ignition switch is in the ON or ACC position. Move the lever (A) in the direction where the mirror that needs to be adjusted is located:
- L Adjustment of the left outside rear-view mirror.
- R Adjusting the right exterior mirror.
To adjust the mirror left, right, up or down, press the corresponding side of switch button B:
- 1 - up;
- 2 - down;
- 3 - right;
- 4 - to the left.
Warning. Do not use a scraper to remove ice from the outside rearview mirrors or attempt to manually adjust the position of the mirrors if they are locked in one place, as doing so may damage the mirrors.
After adjustment, return the lever (A) to the middle position.
The outside rear-view mirrors can be folded down with a simple push of a hand, making it easier to park in tight spaces.
To turn on the mirror defroster, turn the ignition switch to the ON position and press the rear window defroster switch.