- Front camber and caster are factory set and cannot be adjusted during operation.
Camber: 0°40'±30'
Pitch Angle: 2°54'
Tilt Angle: 13°36'
- If the front camber is not within specification, check the front suspension assemblies and replace any deformed or damaged parts.
- For vehicles with aluminum rims, use a special mount to install a sensor on the drive shaft to check the angle in the installation of the steered wheels. Tighten the special fastener with the same tightening torque as the drive shaft mounting nut * (216-255 Nm) (pic. 14.4).
Pic. 14.4. Installing a sensor to check the angles of the steered wheels.