Pic. 17.60. Front bumper: 1 - front direction indicator; 2 - fog lamp lining; 3 - plug; 4 - fog lamp; 5 - front bumper assembly
Removing
- Remove the lower front guard panel.
- Insert a screwdriver, as shown in Figure 17.61, and unscrew the screw securing the front direction indicator. Pulling forward, remove the turn signal and disconnect the electrical connector from it.
Pic. 17.61. Removing the screw securing the front turn signal
- Turn out the screw of fastening of facing of an antifog lamp or a plug. Using a flathead screwdriver, gently pry and remove the fog light trim or plug.
- Pulling forward, remove the fog lights and disconnect the electrical connectors from them.
- Remove the fasteners securing the fender liner to the front bumper.
- Turn out bolts and, pull forward, remove a forward bumper from the car.
- Loosen the bolts and remove the fog light bracket (pic. 17.62).
Pic. 17.62. Front bumper: 1 - fog lamp bracket; 2 - bumper amplifier; 3 - front bumper
Installation
- Installation is carried out in the reverse order of removal, taking into account the following.
- Adjust the fog lights.