Engine with single overhead camshaft SOHC
Pic. 9.30. Ignition coil connector and output (1) high voltage wire
1. When measuring the resistance of the primary winding of the ignition coil, measure the resistance between the contacts «11» And «12» ignition distributor connector (pic. 9.30).
The nominal resistance value is 0.5–0.7 ohms.
2. When measuring the resistance of the secondary winding of the ignition coil, measure the resistance between the output of the high-voltage wire and the contacts «11» or «12» connector (see fig. 9.30).
The nominal resistance value is 21-30 kOhm.