In addition, after replacing the immobilizer electronic control unit, it is necessary to register the password defined by the user in the immobilizer electronic control unit using the MUT-II device. Similar information is provided in the MUT-II user guide.
Attention! When registering new ID codes, all previously registered codes will be erased. In this regard, it is necessary to have all the ignition keys, the codes of which have already been registered.
1. Connect the MUT-II to the diagnostic socket.
Attention! Before connecting (disconnection) on the MUT-II, turn the ignition key to position «OFF» (OFF)
2. Turn the ignition key intended for registration to position «ON» (ON).
3. Use the MUT-II to register the ID code. If you intend to register two or more identification codes (ID code), then insert the next key into the ignition switch and turn it to the «ON» without disconnecting the MUT-II.
4. Disconnect the MUT-II. This will complete the registration operation.