Removing
To remove the parking brake lever, follow these steps.
1. Remove the floor console.
2. Remove the rear seat.
Pic. 14.57. Parking cable lever: a - the place of lubrication; 1 – the switch of a control lamp of a parking brake; 2 – parking brake lever assembly; 3 - bolt (25 Nm); 4 - adjusting nut; 5 - holder of the adjusting nut; 6 - bracket; 7 - cable compensator
3. Unscrew the adjusting nut 4 (pic. 14.57).
4. Remove the holder 5, having previously removed the rear protective pad.
5. Turn away two bolts and remove an arm 6.
6. Turn away two bolts and remove the lever 2 parking brakes in gathering.
7. Turn away a bolt and remove the switch of 1 control lamp of a parking brake.
8. Disconnect the cables and remove the compensator 7 of the cable.
Installation
Installation is carried out in the reverse order of removal, taking into account the following.
1. Adjust the travel of the parking brake lever.
2. Install the floor console.
3. Install the rear seat.