Exterior (external elements) of the car Mitsubishi Carisma

Body technical data
Body technical data

General information about the car body
Car body bearing. It is made from forged and welded parts, including front and rear crumple zones and a rigid center section. Safety measures during welding Be sure to...

Repair of minor body damage
Body scratch treatment If the scratch is shallow and does not reach the metal, wipe the area around the scratch with paint refresher or fine grit abrasive paste. Rinse...

Repair of significant damage to the body
In case of significant damage to the body and the need to replace a significant part of the parts, the work must be carried out at a service station. If the bodywork is...

Hood — removal and installation
Removing To remove the hood, follow these steps. 1. Open the hood and place a clean rag under the corners of the hood to protect the vehicle's paintwork during removal....

Front fender — removal and installation
Removing To remove the front fender, perform the following steps. 1. Remove the front bumper. 2. Remove the headlights. 3. Remove the side fairing. Pic. 17.4. Front...

Fuel tank filler neck hatch
Removing To remove the fuel filler cap, perform the following steps. 1. Remove the front seat. 2. Remove from the driver's side the lower upholstery of the B-pillar, the...

Front bumper — removal and installation
Removing 1. Remove the front bottom guard panels. Pic. 17.41. Front bumper of cars since 1995 of release: 1 - front direction indicator; 2 - bumper assembly Pic. 17.42....

Front bumper repair
Repair of the front bumper of cars from 1995 of release Disassembly 1. Remove the bumper from the car. Pic. 17.43. The design of the front bumper of cars from 1995 of...

Rear bumper — removal and installation
Removing 1. Remove the rear trim. Pic. 17.45. Rear bumper: 1 - mudguard; 2 - rear bumper assembly 2. Remove three screws from each front side of the rear bumper and...

Windshield wiper and washer — removal and installation
Attention! Before removing the airbag module and clock spring, follow the safety precautions when servicing the SRS system. Removing 1. Remove the stalk with integrated...

Rear window cleaner and washer — removal and installation
Attention! Before removing the airbag module and clock spring, follow the safety precautions when servicing the SRS system. Removing 1. Remove the stalk with integrated...

Headlight washer — removal and installation
Attention! Before removing the airbag module and clock spring, follow the safety precautions when servicing the SRS system. Removing 1. Remove the steering column switch...

External rear-view mirrors — removal and installation
Removing 1. Remove an upholstery of a forward door. Pic. 17.53. Side rearview mirror: And – an external rear-view mirror with manual control; B - external rear-view...