Removing
To remove the rear fixed side window, perform the following steps in sequence.
1. Remove the tailgate upholstery and waterproof film.
Pic. 17.18. Front door glass and power window: A - cars with manual windows; B - cars with electric windows; a - place of lubrication; 1 - outer door glass seal; 2 – a flute of a guide glass of a door; 3 – glass of a back door; 4 – back fixed glass and a sealant in gathering; 5 – a sealant of a back motionless glass of a door; 6 – back motionless glass of a door; 7 – the central guide of glass of a back door; 8 - internal door glass seal; 9 - power window assembly
2. Remove the inner seal 8 (see fig. 17.18) rear door glass.
3. Turn away the screw and remove an external sealant 1 glasses of a back door.
4. Remove a flute 2 directing glass of a back door.
5. Lower the glass halfway and use adhesive tape to secure it in this position.
6. Turn off two screws of fastening of holders of glass and through a window aperture take glass 3 from a back door.
Pic. 17.19. Location of the rear door glass center guide screw: 1 - outer seal of the doorway; 2 – the central guide of glass of a door
7. Unbend a part of an external sealant of glass of a door as it is shown in fig. 17.19, and unscrew the screw securing the rear door glass central guide. Remove the central guide 7 (see fig. 17.18) rear door glass.
8. Remove the rear fixed glass and seal assembly 4.
9. Remove a sealant from back motionless glass of a door.