Front and rear driveshafts
1. Rear shaft; 2. Front shaft; 3. Lubricate with GL-4 or SAE 80W oil
Removal and installation
1. Raise the vehicle and place it on stands.
2. Drain the transfer case oil.
3. Mark the mutual orientation of the propeller shaft flange on the side of the front reduction gear and on the flange of the main drive gear of the front reduction gear.
4. Turn away bolts of fastening, disconnect a shaft and get from a distributing box.
5. Installation is carried out in the reverse order.
6. Align the marks on the shaft and gearbox flanges.
7. Tighten the flange mounting bolts with a torque of 49–58 Nm, tighten the plugs with a torque of 29–34 Nm.