Mechanical transmission design 5-speed gearbox type KM 145 5-speed gearbox type V5M21 for all-wheel drive vehicles with a 2.6 l engine 5-speed gearbox type V5MT1 for all-wheel drive vehicles with a...
Gearbox control mechanism Gears are switched by moving the synchronizer clutches with the help of forks mounted on rods, which are actuated by the hinged part and the lever head. The shift lever...
Clutch Release Sensor (1990-98) Pedal height and free play adjustment 1. Without cruise control; 2. With cruise control system; 3. Locknut; 4. Sensor; 5. Bolt 1. Check the height of the clutch pedal...
Gear lever (vehicle 4x4) Details of gearshift and transfer case control levers 1. Handle; 2. Plate; 3, 9. Lid; 4. Gearshift lever; 5, 7, 10, 12. Gasket; 6. frame; 8. Transfer case lever; 11....
Reverse signal switch 1. Determine the position of the switch on the gearbox housing. 2. If the switch is below about 1/3 of the crankcase height, drain the gearbox oil. 3. Disconnect a...
Gearbox shank oil seal (or transfer case drive shaft) 1. Disconnect the battery from the ground. 2. Raise the car. 3. Drain the oil from the manual transmission (or automatic transmission fluid). 4. Designate position of a...
Removal and installation of a transmission Gearbox and transfer case a / m 1992-98 N - the part is subject to mandatory replacement during disassembly-assembly; 1. Casing (case); 2–6. connectors; 7. Sensor off...