Mandrel clutch installation
1. Flywheel; 2. Friction disc; 3. Lubricate; 4. Mandrel; 5. Casing
1. Remove the gearbox.
2. Install the centering mandrel (e.g. old gearbox input shaft), loosen the bolts evenly and remove the clutch discs.
3. Remove the release bearing and clutch release fork (see subsection 9.2.4).
4. Install the clutch in reverse order, cleaning the flywheel and clutch discs.
5. Install the friction disc on the mandrel.
6. Tighten bolts of fastening of coupling to a flywheel with the moment of 18 Нм. (1983-89) or 19 Nm. (1990-98).
7. On cars 1992-98. Lubricate the friction disc and input shaft splines with Mitsubishi part number 0101011.