2.4L engines
Removing
1. Decompress and disconnect the battery from ground.
2. Drain the liquid.
3. Remove the throttle (see subsection 8.2.3).
4. Disconnect the hoses from the regulator, unscrew the fastening bolt and remove the pressure regulator from the fuel distributor.
Installation
1. Installation is carried out in the reverse order, taking into account the following.
2. Replace all gaskets (O-rings).
3. Tighten bolts and nuts.
3.0 and 3.5L engines
Removal and installation
1. Decompress and disconnect the battery from ground.
2. Drain the liquid.
3. Remove the intake manifold.
4. Remove the pressure regulator and disconnect the hoses.
5. Installation is carried out in the reverse order. Replace the regulator ring and tighten the bolts to 9 Nm.