Fuel lines of the fuel system Fuel line details (1994-95) 1, 9, 12. High pressure hose; 2, 4, 13, 16. Gasoline return hose; 3, 15, 18. Fuel return pipe; 5, 6, 7. Vapor hose; 8. Tank with absorber;...
Nozzles — removal, inspection and installation Removing 1. Remove fuel lines. 2. Disconnect the return fuel hose. 3. Turn away nuts of fastening of return tubes to atomizers and disconnect a return tube. 4. Turn out...
Fuel pump (TNVD) — removal and installation Attention! After installing the pump, it is necessary to set the moment of fuel injection, for which a special extension cord with an indicator is required to measure...
Setting the fuel injection timing Tubes of the injection system and injection pump 1. Bracket; 2. Tube; 3. Flange; 4. Key; 5. Bracket Attention! To perform the procedure, you will need an indicator with...
Idle speed adjustment Diesel idle speed adjustment 1. Screw; 2. Locknut; 3. Increase; 4. Throttle lever 1. Warm up the engine and turn off the electrical consumers. 2. Increase the speed to...
Fast idle adjustment Diesel Fast Idle Adjustment Parts 1. Accelerator lever; 2. Stock; 3. cap; 4. Fast idle adjustment screw locknut; 5. Fast idle adjustment screw; 6. Adjusting nut; 7. Nuts...
Glow plugs — removal and installation The diesel engines of the cars in question are equipped with a quick start system (Quick Glow System), providing diesel engine start-up in 5–10 s. The system includes...
Fuel tank — removal and installation Fuel tank on cars 1989-90 with injection engines 1. Pump connector; 2. Sensor connector; 3. Drain plug; 4. Filter; 5. Shield; 6. Limiting valve; 7. Control valve; 8....