Radiator (engines 2.0 l, 2.6 l and diesel)
1. Air outlet; 2. Filler cap; 3. Drain plug; 4. Bypass hose; 5, 6. Hoses; 7. Top casing; 8. Bottom casing; 9. Transmission fluid cooler; 10. Radiator; 11. Drainage hose; 12. Tank
Radiator (2.4L and 12-valve 3.0L engines)
1. Air outlet (2.4 l); 2. Filler cap; 3. Drain plug; 4. Bypass hose; 5, 6. Hoses; 7. Top casing; 8. Collar; 9. Bottom casing; 10. Transmission fluid cooler; 11. Radiator; 12. Drainage hose; 13. Tank
Radiator (3.5L and 24-valve 3.0L engines)
1. Transmission fluid cooler; 2, 8. Hoses; 3. Casing; 4. Bypass hose; 5. Tank; 7. Radiator
4-cylinder engines
Removal and installation
1. Disconnect the battery from the mass, move the heater handle to the HOT position.
2. Drain the coolant.
3. Disconnect the upper and lower hoses from the radiator.
4. Disconnect the oil cooler pipes (on vehicles with automatic transmission).
5. Turn away bolts and remove a radiator.
6. Installation is carried out in the reverse order. Tighten all connections to the required torque.
6-cylinder engines
Removal and installation
1. Move the heater lever to the HOT position.
2. Disconnect the battery from the ground.
3. Drain the coolant.
4. Disconnect from a radiator hoses.
5. Remove the top and bottom fan shrouds (on a 12-valve 3.0 l engine) or single casing (on 24-valve 3.0L engine, or 3.5L engine).
6. Disconnect the transmission fluid cooler pipes (on vehicles with automatic transmission).
7. Turn away bolts and remove a radiator.
8. Installation is carried out in the reverse order.