Engine cooling and lubrication system Mitsubishi Pajero 1 and 2

Cooling system thermostat — removal, inspection and installation
Gasoline engines Thermostat for petrol engines Thermostat check 1. Valve protrusion Removal and installation 1. Disconnect the battery from the ground, remove the air...

Radiator — removal and installation
Radiator (engines 2.0 l, 2.6 l and diesel) 1. Air outlet; 2. Filler cap; 3. Drain plug; 4. Bypass hose; 5, 6. Hoses; 7. Top casing; 8. Bottom casing; 9. Transmission...

Oil cooler — removal and installation
Oil cooler for 4-cylinder engines 1. Bolt union fitting; 2. Gasket; 3. Outlet side tubes; 4. Pressure side pipes; 5. Hoses; 6. Oil cooler; 7. Bracket Oil cooler for...

Radiator fan — removal and installation
1. Upper radiator hose; 2. Top casing; 3. Impeller; 4. Coupling Removal and installation 1. Disconnect the battery from the ground. 2. Remove all belts. 3. Remove the...

Coolant pump — removal and installation
Engine 2.0L Attention! Familiarize yourself with the timing belt removal procedure. Engine coolant pump 2.0L 1. Casing; 2–5. Belts; 6. Impeller with clutch; 7, 8, 9....

Design and description of the cooling system
Parts of the engine cooling system 1. Radiator; 2. Expansion tank; 3. Drain plug; 4. Thermostat housing; 5. Thermostat; 6. Thermostat gasket; 7. Water pump; 8. Water...

Checking the sensor for turning on the electric fan
Checking the sensor for turning on the electric fan

Coolant replacement
Coolant drain 1. Set the heating temperature adjustment knob to the extreme right position, thereby opening the heater tap. 2. Remove the cap from the radiator filler...

Water pump — removal, inspection and installation
Removing 1. Disconnect a mass wire from the storage battery. 2. Drain the coolant. 3. Remove the fan guide shroud. 4. Remove the radiator inlet hose. 5. Remove the power...

Oil pump — design, removal and assembly
Parts of the lubrication system 1. Oil sump; 2. Oil receiver; 3. Oil filter bracket; 4. Oil filter bypass valve; 5. Oil filter; 6. Reinforced hose; 7. Oil cooler; 8. The...

Checking the oil pump thermostat
1. Remove the thermostat from the oil filter bracket. 2. Measure the distance "A" between valve seat (1) and the end of the threaded part of the thermostat housing at...