Front and rear seats
1. While supporting the folded seat, disconnect the hook from the handle.
2. After you have lowered the seat slowly, press firmly on the seat to secure it in place.
Attention! Once you've unhooked the hook, flip the seats over and the legs will automatically unfold.
3. Pull the adjustment lever located on the side of the seat and raise the backrest.
Attention! Make sure the seat legs are folded out. If they do not decompose automatically, spread them out with your hands.
Attention! After you have folded the seat or returned it to its original position, lightly jerk the seat back and forth to check if the seat is properly secured.
Type 1 (manually adjustable seats)
1. Remove the headrests from the front seats and insert them into the storage holes located at the bottom of the rear seat.
2. Tilt the rear seat back fully.
3. With the front seatbacks folded down, slide the front seats fully forward.
4. Fully recline the front seatbacks.
Type 2 (seat with automatic adjustment)
1. Remove the headrests from the front seats and insert them into the storage holes located at the bottom of the rear seat.
2. Tilt the rear seat back fully.
3. Tilt the front seat back so that it is in contact with the rear seat cushion.
4. Move the front seat all the way forward and recline the backrest all the way. The front passenger seat can be folded out in the same way as the driver's seat.
Attention! First recline the seatback and then move the seat forward. If the seatback is in an upright position, the seat cannot be moved forward completely.
Attention! To return the folded seat to its original position, raise the front seatback. The seat will automatically move 9 cm.
Attention! Be careful not to pinch your arm or leg.
Returning the seats to their original position
Raise the backs of the front seats and the back of the rear seat, insert the head restraints into place.
Attention! Do not drive with the seatbacks fully reclined.
Attention! To unfold the seats, first park the car in a safe place.
Attention! Do not walk on the seat backs if they are fully reclined.
Attention! To check that the seats are secure, try unfolding or folding the seats.
Third seat (if provided) and back seat
1. Move the front seats fully forward.
2. Remove the headrest from the third seat and insert it into the storage holes. Then press the adjustment lever and fold the seat back forward.
3. Pull the adjustment lever up and fold the seatback back.
4. Remove the head restraints from the rear seat and insert them into the storage holes located at the bottom of the seat cushion. Lower the side of the seatback by pulling the release lever up.
5. Move the rear seat fully forward.
6. Raise the lever to secure the rear seat.
7. Pull the lever and fully recline the rear seat back.
Attention! If you recline the rear seat, be sure to lower the armrests or you could damage them.
8. To return the seats to their original position, return the second and third seat backs to their original position, then install the head restraints.
Attention! Do not drive with the seatbacks fully down.
Attention! To fully lower the seat backs, park the vehicle in a safe place.
Attention! Do not walk on the seats after their backs have been lowered.
Attention! To check that the seat backs are secure, try lowering or raising them.