Remote control unit
1. The button that closes the door locks (LOCK)
2. The button that opens the door locks (UNLOCK)
3. Indicator lamp
Press the remote control button and the locks of all doors will be opened or closed as you wish. When the LOCK button or the UNLOCK button is pressed, the indicator lamp lights up.
How to close door locks
Press the LOCK button and all doors will lock. If you close the locks and the dome light is set to (), the dome should flash twice.
Opening door locks
Pressing the UNLOCK button once only unlocks the driver's door.
If you open the locks and the dome light is set to (), it lights up for 3 s.
How to open door locks
To unlock all locks, press the UNLOCK button again.
The electronic door locking system will not work if you have left the key in the door lock or if all the doors are open.
If no door is opened within 30 seconds when the UNLOCK button is pressed, all doors will automatically lock.
The remote control works within a radius of 10 m from the center of the vehicle. However, the range of the remote control may change if the vehicle is near a TV tower, power plant or radio station.
If the following phenomena occur when you press the remote control buttons, the remote unit battery may need to be replaced:
- door locks do not open or close;
- The indicator lamp lights up very dimly or does not light up at all.
Do not leave the remote control where it may become hot due to direct sunlight.
If you have lost your remote control, contact your dealer for a replacement control.
Attention! The remote control unit is a very precise electronic device. Therefore, take into account the following:
- – do not expose the remote control to electric current;
- – keep the remote control dry;
- – Do not disassemble the remote control unit.
Attention! Changes or modifications not expressly approved by the manufacturer could void your authority to operate this equipment.