Driving a car — general information Modern technology allows you to drive a new car without experiencing the problems associated with the need to drive at a reduced speed for the first time the car is in...
Choice of fuel and additives Only fuel that does not contain tetraethyl lead must be used to refuel the vehicle. The filler neck of the fuel tank has a special tube into which only a thinner barrel...
Ignition lock — general description LOCK – on models with a manual transmission, when removing the key from the ignition, turn the key to the ACC position and continue to press it until it turns to the...
Anti-theft system — general information Attention! Always remove the key from the ignition and lock all doors when leaving the vehicle. Always try to park your car in a well-lit area. Try not to attract...
Steering column lock Remove the key from the ignition and the steering wheel will be locked to protect the car from thieves. Try turning the steering wheel to make sure it is closed....
Engine starting The car is equipped with an electronic fuel injection system, the amount of injected fuel is controlled automatically. When starting the engine, do not depress the...
Automatic transmission Switching the automatic transmission lever 1. In order to move the lever, it is necessary to depress the brake pedal, press the button on the lever and move the lever to...
Manual Transmission The gear lever knob indicates the positions to which the gear lever must be moved to engage a particular gear. Fully depress the clutch pedal when shifting gears. Never...
Shock absorber control Depending on road conditions or the desire of the driver, the damping force of the shock absorbers can be set to one of three modes. Shock absorber switch 2. Indicator...
Parking brake To apply the parking brake, lift the lever up without pressing the button at the end of the handle. If the ignition key is turned to the ON position and the parking...
Brake pedal Excessive use of the brakes leads to premature wear of the brake pads and poor braking performance of the vehicle. When driving down a long or steep downhill, use engine...
Power brake system The vehicle is equipped with a hydraulic brake booster system in order to provide more braking force with minimal effort required when depressing the brake pedal. The...
Horn warning of brake pad wear When the brake pads of the front or rear brakes are worn beyond the allowable limit, a squeaky metallic sound will be heard when the vehicle is moving. This sound is...
Anti-Lock Brake System (ABS) The anti-lock brake system prevents the wheels from locking when braking, helping to maintain vehicle control and shorten the stopping distance. If your vehicle is...
Steering column height adjustment lever To raise the steering wheel up or down, move the adjuster lever down, then adjust the steering wheel height. After completing the adjustment, lift the lever all the way...
Hydraulic Power Steering System The hydraulic power steering system provides mechanical steering in the event of a hydraulic power steering failure. If, for any reason, the hydraulic pressure in the...
Rear view mirrors Interior rear view mirror for day and night use 1 day 2. Night 3. Handle Adjust the position of the rearview mirror after adjusting the seat position in order to have a...
Cruise control system The cruise control system is an automatic vehicle speed control system (at a speed of 40 km / h and above). When activated, you do not need to hold down the accelerator...
Poddomkrachivanie car Jacking points A. Front jacking point C. Rear jacking point If jacking up the vehicle at point A is not enough, use point B. Before jacking up the car, apply the parking...
Lamp replacement Before replacing a light bulb, make sure it is turned off. Do not touch the glass of the new bulb with your fingers; the skin grease left on the bulb will evaporate as...
The power of the lamps used The bulb must be replaced with a new bulb of the same wattage and type. The power of the light bulb is indicated on its base. External lighting lamps Indoor lamps
Headlights — lamp replacement and adjustment When replacing the left headlight bulb, remove the engine coolant expansion tank. Disconnect the connection connector and remove the cap by turning it counterclockwise....
Rear license plate lamps Loosen the screws securing the diffuser and remove it. Remove the bulb from the socket by pushing the bulb in and turning it counterclockwise.
Trunk light Insert a screwdriver into the slot on the lantern and carefully remove the diffuser. Take the light bulb out of the socket. Attention! Wrap the tip of the screwdriver...
Card Reading Lamps Insert a screwdriver into the slot on the lantern and carefully remove the diffuser. Take the light bulb out of the socket. Attention! Wrap the tip of the screwdriver...
Upper ceiling light Insert the tip of a screwdriver on the side of the diffuser and carefully remove the diffuser. Take the light bulb out of the socket. Attention! Wrap the tip of the...
Top brake light Loosen the fixing screws. Unscrew the fixing screws to remove the cover together with the bulbs. Take the light bulb out of the socket.
Remote lamp Insert the tip of a screwdriver on the side of the diffuser and carefully remove the diffuser. Take the light bulb out of the socket. Attention! Wrap the tip of the...
Fuses — location and replacement The fuse box is located under the instrument panel on the driver's side. If any of the fuses blows, it is necessary to find and eliminate the cause of the blown fuse...