Replacement
1. To remove the brush, press the pin of the retainer and remove it from the hole in the lever.
On parts of cars, the brushes are attached with a screw.
2. To remove the brush assembly with the brush holder, pull the lever until it locks, bend the bracket and remove the brush.
3. To remove the brush assembly with the lever, place the levers in the parked position, turn on the cleaner, unscrew the nut, mark the position of the brush on the glass and remove the brush.
4. To remove the rubber scraper (the rest of the parts need to be removed) remove the frame strips from the holder, then the side of the brush into which the fastening teeth enter - while the teeth should come out of the body of the scraper. Please note that new scrapers are supplied as spare parts without frame parts.