Vehicles without airbag
1. Disconnect the battery from the ground.
2. Remove the horn button cover by pulling on the top edge or by unscrewing the screws from the back of the steering wheel.
3. Loosen the rudder nut and mark the position of the rudder on the shaft.
4. Remove the steering wheel with a puller by screwing the bolts of the puller into the holes on the steering wheel hub.
5. Install the steering wheel, aligning the marks and pushing, screw and tighten the nut with a torque of 40 Nm.
6. Further assembly is carried out in the reverse order.
Vehicles with airbag
Take precautions when working on the airbag (see subsection 13.10).