Steering gear
1. Case; 2. Bolt; 3, 4. Hose; 5. Cotter pin; 6. Nut; 7. Medium thrust; 8. Self-clamping nuts; 9. Steering gear
Removal and installation
1. Disconnect the battery from the ground.
2. Raise the front of the car and remove the wheels.
3. Remove a cover, turn away a lock bolt and a bolt of a collar of a shaft of a wheel.
4. Remove bipod (see subsection 10.4.6).
5. Disconnect and plug the power steering tubes.
6. Turn away nuts and remove the steering mechanism.
7. Installation is carried out in the reverse order.
8. Tighten all connections to specified torques.
9. Remove air from the steering hydraulic drive (see subsection 10.4.12).