Distance between centers of thrust when assembling (1983-91)
1. Medium thrust side
2. From the side of the fist
Distance between centers of thrust when assembling (1992-98)
1. Medium thrust side
2. From the side of the fist
Removal and installation
1. Raise the front of the car and remove the wheels.
 |  |
2. Loosen and remove the castle nuts of the handpiece pins and press out the pins using a knuckle side wedge fork (left) and screw extractor on the medium pull side (on right).
3. Turn out the outer tips, releasing the clamps and counting the number of threads of the thread until it is completely unscrewed (the distance between the centers of the tie rod ends must be 277–279 mm).
4. Install the rods in reverse order.
5. Tighten nuts of tips of drafts with the certain moments. Replace the parts indicated by the letter N.