Hood adjustment

1. Loosen the hinge bolts and move the closed hood until the gap is aligned with the fenders and bulkhead.

2. Open the hood and align completely.

3. Tighten the bolts to 14 Nm.

4. Check up operation of the lock of a cowl. The lock should unlock with little effort on the handle.



5. If necessary, adjust the position of the lock and latch by moving them with the mounting bolts released.



6. Adjust the height of the hood (the surface of the hood must be flush with the fenders), rotating buffers - limiters.



7. Align buffers to support 27mm (1 - hood, 2 - buffer).

8. After adjusting the height, adjust the position of the lock again.

9. Upon termination check up an inhaling of all bolts and nuts of fastening.