Predne glass (up) and back door (1992-98) (on the insert - lubrication points)
1. Central guide; 2. Glass; 3. Holder; 4. Corner; 5. Seal; 6. Power window (on the left - bases of the electric drive, on the right - with the electric drive)
Front door
1. Remove the inner panel and water shield.
2. Lower glass and turn away bolts of fastening of glass.
3. Remove the holders from the door.
4. Feed the glass with the rear edge up and remove the glass.
5. Remove window regulator.
6. Installation is carried out in the reverse order.
Backdoor
1. Remove the inner panel and water shield.
2. Turn away the top and lower bolts of fastening of the central directing and get directing.
3. Remove holders of glass and get glass.
4. Remove the corner together with the seal.
5. Disconnect the drive wires (if provided), turn away bolts and remove window regulator.
6. Installation is carried out in the reverse order.