Car manual transmission Mitsubishi Outlander 1

Checking the performance of the transmission in all ranges
Manual Transmission Check transmission operation in all gears (including reverse). Automatic transmission Check that the selector position indicator is working correctly...

Checking the oil level in the gearbox and transfer case (4WD)
Remove the fill plug. Check the oil level. If the oil level is just below the bottom of the filler hole, this is normal. If the oil level is significantly low, add fresh...

Checking the oil level in a manual transmission
Unscrew the drain sample from the housing. The oil level should be at the bottom of the oil filler hole. Make sure that the gear oil is free from visible traces of...

Checking the oil level in the transfer case (4WD)
Unscrew the oil fill plug from the housing. The oil level should be at the bottom of the oil filler hole. Make sure that the oil does not contain visible traces of...

Changing the oil in a manual transmission
Remove the oil fill and drain plugs. Drain the oil. Before installing the drain plug, remove the metal particles from the magnet mounted on it. Tighten the mounting nuts...

Transfer case oil change (4WD)
Remove the oil fill and drain plugs. Drain the oil. Before installing the drain plug, remove the metal particles from the magnet mounted on it. Tighten the mounting nuts...

Construction and description of mechanical transmission
Cars are equipped with 5-speed manual transmissions for all types of engines. Five-speed gearboxes are available in two versions: F5M42 (4WD) and W5M42 (4WD). All...

Gears and shift lever
On the input shaft of the mechanical gearbox, 5 forward and one reverse are made. All forward drive gears are in constant mesh with their respective driven gears. Part...

Differential and transmission oil
The differential is connected to the gearbox. It is mounted on two tapered bearings between the clutch and gearbox housings. Two oil seals of different diameters seal...

Removal and installation of the gear change drive
Attention! Do not subject the SRS ECU to impacts when removing and installing the gear selection cable and shift cable. Operations before removal and after installation...