Operations to be carried out before removing the generator
Remove the protective cover.
Remove a cross beam of racks of a forward suspension bracket.
Remove the drive belt.
Remove the air filter.
Operations to be performed after the generator is installed
Install the air filter.
Install the drive belt.
Establish a cross beam of racks of a forward suspension bracket.
Adjust the drive belt tension.
Install the protective cover.
Removal of cables of a choice and a gear change and an arm of fastening of cables
Loosen the cable bracket bolt (cables are attached to the bracket), remove the cables and the cable bracket.
Removing the generating set
After removing the bolts and nuts securing the generator, slide the generator towards the gearbox. The generator set is removed upwards through the gap formed by the gearbox and intake manifold.