Electrical equipment and appliances Mitsubishi Outlander 1

Checking wiring harnesses
Check each wiring harness and the corresponding connector. Make sure each wire harness is routed correctly and secure. Check the tightness of the connectors. Check the...

General information about onboard electrical equipment
Cars have an electrical system with a working voltage of 12 V. Electrical equipment is made according to a single-wire circuit - the negative terminals of sources and...

Preliminary operations for checking electrical equipment
Connecting the dark electrical connector Click on the transport lock. The condition of the battery, and its conclusions Check the condition of the battery terminals....

Periodic maintenance of electrical equipment
Checking for damage on high voltage wires Check the high-voltage wires and spark plug tips for damage, weakening of the clamping force of the contacts, and also check...

Maintenance operations for the heater and air conditioner
Checking the refrigerant level through the sight glass Start the engine. Turn on the air conditioner, set the maximum air cooling mode. Keep the engine speed at 1500 rpm...

Adding refrigerant to the system using a charging bottle
Install the charging valve with the handle pulled back as far as it will go (valve open) to the charging bottle. Install the adapter valve with the handle pulled back as...

Filling the air conditioning system with oil
Reducing the amount of oil in the compressor system worsens its lubrication and leads to failure of the air conditioner itself. Too much oil increases the outlet air...

Refrigerant Leak Repair Technique
Discharge system If the system has lost all refrigerant due to a leak, follow the steps below. Empty the system. Fill the system with refrigerant: approximately 480 to...

Checking the power relay of the heater and air conditioner
Checking the state of conductivity of the heater relay Checking the state of conduction of the relay of the air conditioning compressor Checking the continuity status of...

Checking the operation of the heater system in the engine warm-up mode
Before starting the check and adjustment, bring the engine to the condition described below. Coolant temperature: 80-90°C. Lighting, electric fan and other auxiliary...