Attention! When removing and installing the steering wheel, do not hit the airbag module.
Additional operations after installation.
Check that the steering wheel position is in line with the straight ahead position of the front wheels.
Removing the cover
Insert ornament remover (MV990784), as shown in the figure and remove the cover.
Note. This tool can be inserted into the recess at the back of the specified location.
Removing the steering wheel and airbag module assembly
Move section A of the clock spring connector in the direction of the arrow as shown in the figure, disconnect the connector.
Loosen the bolt completely. Then remove the steering wheel and airbag module assembly.
Note. To perform this operation, you must use a hex head or a hex key with a length of at least 75 mm of the hex part of the key and a diameter of at least 8 mm.