Place the vehicle on a level surface with a smooth surface, turn the steering wheel to set the steered wheels to the straight ahead position.
Start the engine and leave it to idle.
Rated value: 750 + 100 min-1.
Attach a spring dynamometer to the outer circumference of the steering wheel and measure the force required to turn it from a straight-ahead position to the left and right (within 1.5 turns). At the same time, also pay attention to the absence of a change in the effort expended when turning the steering wheel.
Nominal value: the force expended on turning the steering wheel is not more than 29 N.
Permissible deviation: no more than 5.9 N.
If the measured value exceeds the rated value, check and replace the relevant parts.