Removing
Remove the rear door sill trim.
Remove the bottom facing of a back door.
Remove the waterproof film from the door.
The parts are removed in the order shown in the figure.
Installation
When installing parts, pay attention to the operation of removing the door lock retainer.
Install the door lock retainer so that the deviation of its center line relative to the center line of the counter part of the door lock does not exceed 1.5 mm.
After completing the installation of the parts, check the movement of the rear door outside handle.
Install a waterproof door film.
Establish the lower facing of a back door.
Install the rear door sill trim.