Variator (CVT) of the car Mitsubishi Lancer 9

General information about the variator
Attention: The variator model is indicated in the line "TRANS/AXLE" on the identification plate, the location of which is given in chapter " Identification ". The...

CVT Diagnostics
Troubleshooting Note: CVT failures can be caused by improper maintenance, improper adjustment or failure of the CVT electronic control system, mechanical failure,...

Checking the mechanical systems of the variator
Road test (road test) Before road testing, ensure that basic checks have been completed, including checking the level and condition of the CVT fluid and adjusting the...

Checking the CVT control system
Checking the components of the variator control system Note: - The procedure for checking the accelerator pedal position sensor is given in the chapter " fuel injection...

CVT control cable
Removing Caution: Do not strike the SRS electronic control unit when removing and installing the CVT control cable. − Before starting the removal: A) Remove the battery...

CVT selector
Removing Caution: Do not strike the SRS electronic control unit when removing and installing the CVT control cable. − Before starting the removal: A) Remove the battery...

Ignition Lock System and CVT Selector Lock System
Removing Caution: Do not strike the SRS-ECU when removing and installing the selector lock cable and the ignition lock cable. − Remove the lower part of the center...

Variator assembly
Removing Before you start removing parts, do the following: A) (4WD Models) Remove transfer case (see section " Transfer box assy "). 6) Remove the bottom protective...