Car engine overhaul Mitsubishi Lancer 9

Rocker shafts and camshaft (MPI engines)
Disassembly The main preliminary operations that you need to pay attention to are given in the sections " Replacement of oil seals " And " Replacing the cylinder head...

Rocker arms and camshafts (GDI engines)
Disassembly The main preliminary operations that you need to pay attention to are given in the sections " Replacement of oil seals " And " Replacing the cylinder head...

Cylinder head and valves
Disassembly Attention: Lay out the removed parts according to the cylinder number and intake / exhaust valves so as not to mix them up during assembly. Removal of parts...

Piston and connecting rod
Removal and disassembly Removal of parts is carried out in the order of the numbers indicated in the figure "Removing the piston and connecting rod ". Note: the...

Cylinder block, crankshaft and torque converter drive plate
Removing Removal of parts is carried out in the order of the numbers indicated in the figure "Removing the crankshaft and torque converter drive plate". Lay out the...

Engine support
Removal and installation − Before beginning to remove parts, raise the power unit until the engine mount is free from the load on the power unit. − Removal of parts is...

Gearbox support
Removal and installation − Before starting to remove parts, carry out the following operations: A) Raise the power unit until the transmission support is free of load....

Central longitudinal beam and power unit supports
Removal and installation − Before starting to remove parts, carry out the following operations: A) Remove the engine crankcase guard. b) Remove a reception pipe of...

Cross beam front suspension
Removal and installation Attention: on models with an additional passive safety system (SRS) before removing the steering gear, set the front wheels to the...