Car engine GDI repair Mitsubishi Lancer 9

General information about GDI engines
Gasoline engines 4G15 and 4G93 - in-line four-cylinder with overhead camshafts and valves in the cylinder head. Cylinder firing order: 1-3-4-2. The cylinder block is...

Checking hydraulic lifters
Engine Diagnostics If, after starting the engine, an extraneous sound appears and does not disappear as the engine warms up ("clatter") from the hydraulic lifters,...

Replacing the timing belt (4G15 engine)
Removing Before you start removing parts, do the following: A) Remove the decorative engine cover. b) Remove the engine crankcase guard. V) Remove the support bracket...

Replacing the timing belt (4G93 engine)
Removing Before you start removing parts, do the following: A) Remove the decorative engine cover. b) Remove the engine crankcase guard. V) Remove the support bracket...

Replacement of oil seals
Camshaft oil seal replacement Before you start removing parts, do the following: A) Release residual pressure from the high pressure line (see chapter " fuel injection...

Replacing the cylinder head gasket
Removing Perform the following operations before beginning to remove parts. A) Remove the decorative engine cover. b) Release residual pressure from the high pressure...

Complete engine
Removing Perform the following operations before beginning to remove parts. A) Remove the decorative engine cover. b) Release residual pressure from the high pressure...