Caution: Do not scrape frost off the mirror glass as this may damage the mirror surface. If the ice is preventing the mirror from moving, do not try to remove it by force. To remove ice, use aerosol de-icers, a sponge or cloth soaked in warm water.
Note: The mirror element of the driver's side rearview mirror has a different curvature of the inner and outer parts, separated by lines. The outer part of the mirror element gives a wider viewing angle than the inner part and the objects seen in it will appear more distant.
Mirrors are adjusted from the mirror control panel. In this case, the ignition key must be in position "ON" or "ACC".
1. The choice for control between the right or left mirror is made by setting the main switch (1) to the relevant provisions: "R" - right mirror; "L" - Left mirror.
2. Control switch (2) the position of the mirror is adjusted.
3. After setting the mirrors to the desired position, move the main switch (1) to the middle position.
Attention:
- Do not adjust the mirror while the vehicle is moving. This may lead to driver error in driving and cause an accident.
- Do not drive with the side mirrors folded down. Failure to see the rear view with the side mirrors can lead to an accident.
4. The mirror can be folded to prevent damage when parking the car. To fold the mirror, simply press down on it with your hand. Installing the mirror in working condition is carried out in the reverse order.
5. Some modifications of cars have an additional function - automatic folding of mirrors, which is done by pressing the switch shown in the figure. To return the mirrors to their working position, press the switch again.
Attention:
- When folding the mirrors, keep your hands between the vehicle and the mirror to avoid pinching and injury.
- To avoid damage to the power mirror, do not fold it when the mirror is frozen.
Note:
- The side mirrors can be folded or returned to the working position within 30 seconds after the ignition key is turned to the "LOCK".
- After starting the engine, the mirror will automatically return to its working position when the vehicle is moving at a speed of more than 30 km/h.
Interior rearview mirror with mechanical anti-dazzle device
1. The car is equipped with an interior rearview mirror with two positions ("day Night"). To select a position "night" (anti-dazzle effect), pull the lever at the bottom of the mirror towards you..This position reduces the glare from the headlights of cars behind you at night.
2. The interior rearview mirror can be adjusted in height.
