Removal and installation
- Parts are removed in the order of the numbers shown in the figure "Removing trim".
Removing trim (sedan). 1 - front side door sill trim, 2 - front side trim, 3 - rear side door sill trim, 4 - front side door inner seal, 5 - rear side door inner seal, 6 - A-pillar trim, 7 - B-pillar lower trim, 8 - front seat belt top mounting plate, 9 - B-pillar top trim, 10 - C-pillar trim, 11 - rear shelf trim, 12 - end cap, 13 - trunk front trim, 14 - trunk sill trim, 15 - trunk side trim.
The location of the latches and latches of the trim components (sedan).
Note: arrows "" the locations of the plastic clamps are indicated.
Removing trim (station wagon). 1 - front side door sill trim, 2 - front side trim, 3 - rear side door sill trim, 4 - front side door inner seal, 5 - rear side door inner seal, 6 - A-pillar trim, 7 - B-pillar lower trim, 8 - front seat belt upper mounting plate, 9 - B-pillar upper trim, 10 - tailgate sill trim, 11 - tool storage tray, 12 - luggage lock #1, 13 - rear shelf trim, 14 - luggage lock # 2 (remove the rear seat back assembly, rear seat cushion assembly and luggage compartment mat), 15 - Luggage Side Trim, 16 - Rear Shelf Latch, 17 - Rear Seat Belt Upper Attachment Plate, 18 - C-pillar Trim, 19 - C-pillar Trim Holder, 20 - Luggage Compartment Mat Holder, 21 - Storage Tray Holder tools.
The location of the latches and latches of the trim components (station wagon).
Note: arrows "" the locations of the plastic clamps are indicated.
− When removing the parts, pay attention to the removal of the A-pillar trim.
After removing the A-pillar trim tabs, pull the A-pillar trim towards the instrument panel and remove it.
− Installation of parts is carried out in the reverse order of removal.