Removing and installing license plate mounting plate
− Removal of parts is carried out in the order of the numbers indicated in the figure "Removing the license plate mounting plate".
Removing the license plate mounting plate. 1 - bolt, 2 - license plate mounting plate 3 - license plate mounting bracket 4 - spacer.
− Install parts in the reverse order of removal.
Note: When attaching the license plate mounting plate, use bolts with a diameter of 6 m and a length of 22-25 mm.
Removal and installation of a back spoiler (sedan)
− Before starting to remove parts, carry out the following operations:
- A) Remove the trunk lid trim.
- b) Disconnect the auxiliary brake light connector.
− When removing and installing the rear spoiler, refer to the figure "Removing the rear spoiler".
Removing the rear spoiler.
− After completing the installation of the parts, perform the following operations:
- A) Connect a socket of an additional stoplight.
- b) Install the trunk lid trim.
Removal and installation of a back spoiler (station wagon)
− Before starting to remove parts, carry out the following operations:
- A) Remove the rear door trim.
- b) Disconnect the auxiliary brake light connector.
- V) Disconnect the tailgate glass washer hose.
- Parts are removed in the order of the numbers shown in the figure "Removing the rear spoiler".
Removing the rear spoiler (station wagon). 1 - rear spoiler assembly, 2 - additional brake light, 3 - rear spoiler.
Removing the rear spoiler (station wagon modifications from 05.2001). 1 - rear spoiler assembly, 2 - additional brake light, 3 - rear spoiler.
− Installation of parts is carried out in the reverse order of removal.
− After completing the installation of the parts, perform the following operations:
- A) Connect the tailgate glass washer hose.
- b) Connect a socket of an additional stoplight.
- V) Install the tailgate trim.
Removing and installing roof rack supports (station wagon)
- Parts are removed in the order of the numbers shown in the figure "Removing roof rack supports".
Removing roof rack supports. 1 - end cover of the front part of the roof rack, 2 - side cover of the roof rack support, 3 - end cover of the rear of the roof rack support, 4 - roof rack support.
The location of the latches of the roof rack supports.
Note: arrows ""pin locations are indicated.
− Installation of parts is carried out in the reverse order of removal.