Car gearbox Mitsubishi Lancer 3 and 5

Gearbox — device
The gearbox forms a single unit with the wheel drive. She shoots down without an engine. Removal is required if the clutch needs to be removed or if the gearbox needs to...

Removal and installation of a transmission
The gearbox drops down when removed. Therefore, it is necessary to have an appropriate jack or 4 stands to lower the gearbox. Designations in the text refer to fig....

Gear shift actuator — device
COLT / LANCER uses cables instead of conventional shift rods (except for models with a petrol engine from 1.84 to 8.86). This has the advantage that less unwanted...

Gear Lever Adjustment
Vehicles with shift cable adjuster Gear selector cable adjustment 1 - neutral, 2 - gear lever, 3 - gear selection lever, 4 - gear selection cable. Set the transmission...

Automatic transmission — general information
At the request of the client, COLT / LANCER can be equipped with an automatic transmission. The automatic transmission has 3 forward gears shifted automatically. To...

Automatic transmission throttle cable adjustment
The position of the gas pedal is transmitted to the automatic transmission by means of a cable. It is mounted on a cam on the throttle valve shaft of the fuel injection...

Adjustment of the switch of blocking of blocking of start of automatic transmission
If the engine can be started in positions other than "N" And "R", the start inhibit switch should be adjusted. Adjustment (release from 9.88 to 4.89) Set selector lever...