Tire pressures must comply with the prescribed values.
The unladen vehicle must be loaded with 75 kg (1 person) to the driver's seat. The tank must be filled. For the correct draft of the springs, roll the car for several meters.
Put the car on a flat surface.
Set the light range control to position "ABOUT".
Adjustment is made only at a passing beam. The amount of tilt for conventional headlights is 12 cm at a distance of 10 meters. For fog lamps 20 cm at a distance of 10 m.
Release cars up to 8.88
Vehicles from 9.88
Both illustrations show the left headlight on the right headlight, the adjusting screws are mirrored. Adjusting screws on vehicles from 9.88:
- A - vertical adjustment of the internal headlight;
- B - horizontal adjustment of the internal headlight;
- C - vertical adjustment of the external headlight;
- D - horizontal adjustment of the outer headlight.
A Phillips screwdriver is required for adjustment.