Car front and rear suspension Mitsubishi L200 4

Specifications of wheels and tires
Elements Single cab Club cab, Double cab Vehicles without fender flares Vehicles with fender flares All wheels except spare Steel Steel or aluminum Aluminum Spare wheel...

Front suspension description
The front wheel suspension is made on two transverse levers with the steering knuckle fastened to the levers using ball bearings. The spring, together with the shock...

Front wheel suspension for vehicles with rear wheel drive (2WD)
1. Shock absorber; 2. Helical spring; 3. Upper arm; 4. Lower arm; 5. Roll 2WD Coil Spring Specifications Parameter Standard Option Bar diameter 17 mm 17 mm Average coil...

Front wheel suspension of vehicles with all-wheel drive (4WD)
1. Shock absorber; 2. Helical spring; 3. Upper arm; 4. Lower arm; 5. Roll 4WD Coil Spring Specifications Parameter Single cab Club cab, Double cab Standard Option...

Front Suspension Performance Specifications
Elements Standard value Front wheel alignment According to the average diameter of the side surface of the tire 0.0-5.0mm Convergence angle (for each wheel) 0°00’-0°12’...

Upper arm front suspension
Structural elements of the upper arm assembly: 1. An arm of fastening of the gauge of frequency of rotation of a forward wheel (for vehicles equipped with ABS); 2. Brake...

Front suspension shock absorber — removal and installation
Disassembly is carried out in the order indicated in Fig. M2 5.071. Structural elements of the shock absorber assembly: 1. Lid; 2. Wheel speed sensor wire clamp (for...

Front shock absorber strut
Disassembly is carried out in the order indicated in Fig. M2 5.0721. Structural elements of the shock absorber strut: 1. Self-locking nut (replace with a new one when...

Lower arm front suspension
Structural elements of the lower arm assembly: 1. Cotter pin (replace with a new one when reassembling); 2. Lower arm ball joint and knuckle joint; 3. Tie rod and...

Stabilizer bar of the front suspension
Disassembly is carried out in the order indicated in Fig. M2 5.074. Structural elements of the anti-roll bar: 1. Stabilizer connection assembly; 2. Stabilizer clamp; 3....

Description of the design of the rear suspension
1. Shock absorber; 2. Leaf spring; 3. U-bolt; 4. Buffer spring Leaf Spring Specifications Parameter Single cab Club cab Double cab Standard Option Standard Option Number...

Dismantling and assembly of a suspension bracket of back wheels
Elements of the design of the rear suspension assembly: 1. Bolt of fastening of a cable of a parking brake; 2. Shock absorber; 3. U-bolt overlay; 4. U-bolt; 5. Buffer...