Car steering Mitsubishi L200 4

General description of steering
Steering is conventional rack and pinion steering with integrated power steering hydraulic actuator (further - power steering). The power steering pump is a rotary vane...

Steering design elements
1. Tank for oil; 2. Oil supply hose to the pump; 3. Oil pump assembly; 4. Discharge hose; 5. Oil return hose; 6. Rack and pinion steering; 7. Cross beam front...

Control and adjustment parameters
Characteristic Standard value Limit value Steering wheel free play with engine off 30 mm Steering wheel free play with engine running no more than 10 mm Angle of...

Steering column — design description
Steering column design elements: 1. Lower part of the column casing; 2. Upper part of the column casing; 3. Block paddle switches; 4. A nut of fastening of an arm of a...

Steering column shaft disassembly
Disassembly sequence: 1. Breakaway steering column lock bracket screw; - to unscrew, use a chisel or extractor for studs; - when assembling, replace with a new one; 2....

Steering wheel — disassembly and assembly
Steering wheel design elements: ; 1. Lid; 2. Airbag assembly; 3. Steering wheel nut (pi assembly replace with a new one); 4. Steering wheel Disassembly is carried out in...

Removal and installation of the steering gear assembly
Steering gear design elements: 1. Cotter pin (replace with a new one when reassembling); 2. Tie rod connection with steering knuckle; 3. Tie rod end; 4. Steering column...

Tie rod installation
Initial installation of a tip of steering draft is shown on fig. M2 6.006. After assembly is complete, check and adjust the wheel alignment.

Disassembly and assembly of the steering mechanism
Steering gear design elements (for left-hand drive vehicles): 1. Rubber mounting sleeve steering gear; 2. Mounting rubber-metal bushing for mounting the steering...

Power steering oil pump
The power steering pump is a rotary vane pump with two chambers. The rotor with centrifugal blades rotates inside a shell with a special internal profile forming two...

Power steering oil pump disassembly
The list of structural elements of the power steering oil pump for drawings M2 6.014-M2 6.015: 1. Oil pump cover. 2. O-ring (replace with a new one when reassembling)....

Steering system hoses
Structural elements of the steering hose system: 1. Tank for oil; 2. Return hose; 3. Nourishing (to oil pump) hose; 4. Hollow screw connecting the pressure pipe to the...