| Detail | Standard value | limit value | ||
| brake pedal height | 178.3-181.3mm | |||
| Free travel of the brake pedal | 3-8mm | |||
| Gap between brake pedal and floor | not less than 75 mm | |||
| Brake force regulator depending on vehicle load (LSPV) (vehicles without ABS) | ||||
| Input pressure 6.44 MPa with spring length: 162.6 mm with standard rear suspension | 2.86-3.76 MPa | |||
| Input pressure 17.64 MPa with spring length: 162.6 mm three standard rear suspension | 4.91-6.19 MPa | |||
| Input pressure 16.05 MPa with spring length: 205.1 mm with standard rear suspension | 11.71-14.11 MPa | |||
| Input pressure 6.00 MPa with spring length: 162.6 mm with standard rear suspension | 2.41-3.31 MPa | |||
| Input pressure 17.64 MPa with spring length: 162.6 mm with reinforced rear suspension | 4.55-5.83 MPa | |||
| Input pressure 10.99 MPa with spring length: 190.7 mm with reinforced rear suspension | 6.87-8.83 MPa | |||
| Length of pressure limiter dosing valve spring (LSPV) | 1516-160 mm | |||
| Disc brake lining thickness | 9.5mm | 1.5mm | ||
| Disc Brake Disc Thickness | 28.0 mm | 26.4mm | ||
| Brake disc wear | 0.06mm | |||
| Disc Brake Resistance Force | no more than 56N | |||
| Thickness of the brake lining of the drum brake | 5.0 mm | 1.0mm | ||
| Rear brake drum inner diameter | 295 mm | 297 mm | ||
| Axial clearance of the front hub | 0 | |||
| Protrusion of a rod of a pusher of the valve of the brake booster (when a negative pressure of 66.7 kPa is applied to the amplifier) on vehicles without traction control (ASC) | 9.925-10.175 mm | |||
| Protrusion of a rod of a pusher of the valve of the brake booster (when a negative pressure of 66.7 kPa is applied to the amplifier) on vehicles with traction control (ASC) | 6.675-6.925 mm | |||
| Characteristic | Meaning |
| master cylinder | |
| Type | paired |
| Inner diameter | 23.8mm |
| brake booster | |
| Type | vacuum |
| Effective master cylinder diameter | 255 mm |
| Gain | 7,0 |
| Method for controlling the hydraulics of the rear wheels of cars without ABS | valve for adjusting the brake force of the rear wheels depending on the mass (LSPV) |
| Method for controlling the hydraulics of the rear wheels of cars with ABS | electronic brake force distribution (EBD) |
| Front brakes | |
| Type | floating caliper, 1 piston, ventilated disc |
| Effective disc diameter x thickness | 254.0x28.0mm |
| Cylinder inner diameter | 60.6 mm |
| Brake lining thickness | 9.5mm |
| Gap adjustment | automatic |
| Rear brakes | |
| Type | Drum with one double-sided brake cylinder |
| Drum inner diameter | 295 mm |
| Cylinder inner diameter | 22.2 mm |
| lining thickness | 5.0 mm |
| Gap adjustment | automatic |
| Brake fluid | DOT3 or DOT4 |