2. Move the selection lever to the neutral position, and from the inside of the car, turn on the 4th gear - if necessary, squeeze the clutch.
3. Make sure that the transfer of the shift lever to the 4th gear position is unambiguous.
4. Rotate the adjuster turnbuckle until the end of the drive cable is in the lever receptacle. gear shifting. Make sure that the plastic sleeve of the cable end is turned with a flange to the cotter pin.
5. Adjust cables. Try to achieve a situation where the gap between the lever and the two stops remains the same when you turn on both 3rd and 4th gears.
6. Moving the lever, make sure that the gear change is smooth.