General information about on-board electrical equipment Attention! Before you start servicing the components of the onboard electrical equipment, read the requirements of the safety regulations for working with electrical...
Onboard Electrical Specifications Fuse location map in the mounting block on Mirage models up to 1992, no. Fuse location map in the mounting block on Mirage models 1993÷1996. issue Fuse location map in...
Search for the causes of electrical equipment failures Attention! The procedures described below provide a general diagnosis of the condition of the main electrical circuits, but should not be used to test easily vulnerable...
Electrical connectors — general information Most of the onboard electrical circuit connectors are made of plastic and are multi-contact. The reliability of the articulation of the halves of such connectors is...
Fuses, fuse links and circuit breakers Various combinations of fuses, fuse links and circuit breakers are used to protect the contact circuits of the vehicle's electrical equipment. Mounting blocks are...
Relay — general information and function check To supply power or control signal to many of the electrical consumers in the vehicle (such as fuel injection components, horn, starter, fan (s) cooling systems, fog...
Checking and replacing the turn signal / alarm breaker Warning! The car models covered in this manual are equipped with an additional security system (SRS). Before doing any work near the airbag unit, steering column or...
Removal and installation of switches Windshield wiper operation control switch The switch is part of the assembly of the right steering column switch - see Chapter Suspension and steering . Rear window...
Replacing light bulbs Note. The map of the lamps used and the layout of the lighting fixtures are given in Specifications to this chapter. Combination headlights Headlights can use...
Removal and installation of a combination of devices Warning! The car models covered in this manual are equipped with an additional security system (SRS). Before doing any work near the airbag unit, steering column or...
Replacing Instrument Cluster Gauges Removing 1. Disconnect the negative cable from the battery. Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting...
Removing and installing radio / CD player Removing 1. Disable SRS (see Section Additional security system (SRS) - general information and precautions ) /disconnect the negative cable from the battery. Attention!...
Removing and installing the CD changer Removing 1. Disconnect the negative cable from the battery. Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting...
Removing and installing loudspeakers Front speaker installation details 1 - Loudspeaker; 2 - Pin connector Door tweeter installation details 1 - Decorative overlay; 2 - tweeter; 3 - Panel of an internal...
Removal and installation of levers of screen wipers Note. The following procedure is for the windshield wiper arms. Removal and installation of rear wiper elements on the Diamante Wagon and Mirage Hatchback models are...
Removal and installation of the wiper motor drive Mirage models through 1992 no. Front wipers Removing 1. Disconnect the negative cable from the battery. Attention! If the stereo system installed in the car is equipped...