Removing
1. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. On models with a manual drive for power windows, remove the regulator handle with a facing frame, - release the handle fastener by prying it with the edge of a stretched piece of fabric.
3. On models equipped with power windows/door lock actuators, release the control switch panel and disconnect the wiring connected to it.
4. Turn out the fixing screw and remove facing of the internal handle of a door. Remove the handle.
 |  |
5. At the appropriate complete set, turn out fixing screws and remove the hand-rail handle of a door.
 |  |
 |  |
6. Turn out screws of fastening of the panel of an internal upholstery of a door.
7. Carefully prying off the clips located along the perimeter of the interior upholstery panel, separate the latter from the door frame - try not to damage the panel when releasing the clips.
 |  |
8. Carefully release the fasteners of the upholstery panel remaining in the frame, replace the damaged elements.
9. If necessary, remove the insulating screen from the door frame.
Installation
1. If removed, replace the insulating screen.
2. Replacing damaged clips, install the interior upholstery panel to the door frame.
3. Make sure that the latches snap into place; if necessary, replace defective elements.
4. Install the remaining components in the reverse order of their dismantling.