Removing
1. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
2. Open the luggage compartment lid. Locate the latch release cable.
3. Disconnect the drive cable from the latch.
4. Disconnect the relevant electrical wiring.
5. Circle the buttonholes with a marker.
6. Support the cover in the open position.
7. If equipped, remove the lock covers and gas-filled springs.
8. Release fixing bolts and remove loop levels.
9. Remove the cover from the vehicle.
Installation and adjustment
1. Installation is carried out in the reverse order.
2. Check up correctness of position of the closed cover in a body aperture. If necessary, loosen the bolts securing the hinge bars and make the appropriate adjustments. The height of the lid position can be adjusted by turning the rubber feet. If necessary, correct the position of the striker of the lock.