Installation details of the external handle and door lock drive elements
1 - Lock off button; 2 - Assembling the door latch; 3 - External door handle; 4 - Lock activator
Removing
1. Installation details of the outer handle and door lock drive elements are shown in the illustration.
2. Disconnect the negative cable from the battery.
Attention! If the stereo system installed in the car is equipped with a security code, before disconnecting the battery, make sure that you have the correct combination to activate the audio system!
3. Remove the panel of an internal upholstery of a door.
4. Remove the door insulation screen.
5. Release the latch and remove and disconnect the lock drive rod from the door handle.
6. Release fixture and remove the external handle from a door.
Installation
Installation is in the reverse order.